Things You Need To Know Before Operating a Jackhammer

A lot of time and effort goes into laying concrete structures, but sometimes it is necessary to tear apart those structures for other construction purposes. Tearing apart concrete is no easy task. Builders and contractors often turn to jackhammers to help with this big job.

A jackhammer is a serious piece of heavy equipment, and jackhammer operators must understand a few important rules before working with this tool. This quick guide will provide you with some important tips on how to operate a jackhammer.

Is a Jackhammer Easy To Operate?

The short answer is, no. A jackhammer is a major piece of heavy equipment. It takes practice to learn how to operate this equipment safely and effectively. Although a jackhammer can greatly speed up a concrete demo job when used correctly, it can actually slow down operations and endanger the team when it is not used correctly, making it a liability rather than an asset. This is why you should pay special attention to the following considerations before operating a jackhammer.

Proper Safety Equipment

There is specific safety equipment that will need to be used before you can safely operate this equipment. You will need to use the following types of safety equipment to avoid serious injuries:

Proper Training

Do not attempt to use a jackhammer until you have had proper training on safe operation. If you are using the jackhammer at work, your employer must provide this training. If you are using a jackhammer at home, it is your responsibility to get the proper training before operating the equipment. Your safety and the safety of those around you depend on your proper training.

Proper Placement

Jackhammers are used along with an air compressor to reduce noise. Be sure to place the compressor far from the worksite. This can help keep your ears safe and make the job run more smoothly.

Proper Inspection

You should take some time prior to the operation to inspect the jackhammer. You need to check for any defects or damage that could affect the operation of the equipment.

Proper Self Position

It is also very important that you position yourself properly as well while operating the jackhammer. It should be placed at an angle leaning back toward you. This will give you more control over the tool.

Be sure to lift with your thighs. This will decrease the instance of back strain.

Proper Point Usage

Jackhammers come with different points to be used on different materials. Choosing the correct point for the material will ensure a safe job that runs smoothly and effectively. Be sure to study the points and their different applications so that you can choose the proper one for your project.  

Proper Work Area

The area you will be working in should be cleared prior to operation. All bystanders should be cleared as well as animals. If you notice someone entering the job area, shut down the machine.

Welcome to Our Blog

Welcome to our blog. We are glad you found your way here. You will find interesting and valuable articles pertaining to our business and the services we offer. Continue to come back as our blog will be coming soon with updated articles.

Some Do’s and Don’ts Regarding Rental Equipment

Any job can be done correctly with the right equipment. Renting the right equipment comes down to organizing ahead of time, familiarizing yourself with where you stand, and focusing on the details. There are several dos and don’ts when it comes to rental equipment. Here is what to know about renting equipment.

Do’s & Don’ts of Rental Equipment

If you are wondering how to rent equipment, here are some do’s and don’ts to keep in mind.

Make sure you put some time aside to do research before you rent any equipment. Try to find at least three different rental companies to compare. Check their quality, pricing, and other things, including deposits, delivery, and pick-up times. Once this information has been gathered, you can head to the facility to meet in person. When meeting in person, grade their customer service. Even though rental equipment should not be expensive, you should obtain high-quality equipment backed by excellent customer service. If you are not receiving that, you will probably be better off purchasing the equipment on your own.

Make sure that you not only do your research but put down a deposit. This guarantees that you will be able to cater to your guests in the best way possible on your big day. The best parties or events were planned early, and plenty of time was left to make any necessary changes.

Make sure that you ask as many questions as needed. If you don’t understand something, ask. Knowing where you stand and the task that needs to be completed is essential. This will help you better understand how long you need your rental equipment and how much equipment you need to rent. For example, you know that your job will take four hours to complete, but there is only a limit of three hours on the equipment. This means you must make some adjustments and plan accordingly.

Do know what your budget is, so you can accurately choose the option that is most affordable for you.

Don’t walk away from the rental company until you understand what’s expected of you as the customer and from the rental company. This is where many issues occur. This is why checking the terms and conditions box is an absolute must, but you should understand what those terms and conditions actually mean.

Avoid renting alone. Instead, try to find a friend or neighbor to rent with to help save yourself some money. It is already hectic enough for you to spend additional money on your event and rent the equipment needed.

How To Use a Power Auger


Doing yard work and other projects by yourself is commendable. However, some projects go much more smoothly with the assistance of a mechanical item. A power auger can come in handy if you need to dig holes to create room for a fence or another fixture in the yard.

You can find power augers at home improvement stores and online shops, which can be set up for one or more users. The following are some instructions on how to use a power auger to help you with your project:

Run It

It’s understandable if you need to learn how to start a power auger. The first step in the process is stabilizing the unit on the ground and setting the choke in the "RUN" position. 

Pump It

Next, you’ll need to look for the primer bulb and pump that several times. You are done priming it when you see the fuel line. 

Set the Choke

The manufacturer’s guide provides instructions on setting the choke, which might be different for every model. Thus, you’ll need to refer to your guide and set the choke the way it explains. Typically, you will put it to "FULL CHOKE" if the engine is cold and "HALF CHOKE" for a warm engine. 

Turn It On

Now your auger needs a little power. Hence, you need to turn the ignition to the "ON" position to start. 

Pull and Squeeze

The next step requires you to do two activities at once. Master this, and you’ll know how to start an auger appropriately. 

You’ll need to pull the start cord while you squeeze the throttle. Ensure that you keep your feet away from the auger while trying to start it because it will be engaged and can cause bodily harm. Steer clear enough to avoid injuries when it starts. 


Avoid squeezing the throttle too much at first. The goal should be to squeeze it just enough to pierce the ground. Let it get into the ground a few inches before applying additional pressure to the throttle. Once you do that, you and the other person can get into a digging groove. 

Tips for Using an Auger Effectively

These are some tips to be mindful of as you use the power auger:

Don’t Work Too Hard

The machine is there to make your work easier. Thus, you don’t need to put a tremendous amount of power into operating it. Let its weight handle the load. 

Remove Dirt Periodically

You should stop the machine every now and again and then pull it out to remove some of the dirt. This simple process will make the work a lot easier for you. 

Remove Difficult Objects With Your Hands

Stop the machine if you come across any challenging objects like rocks. Pull them out of the way with your hands, and be careful when doing so. 

Rake and Shovel Extra Dirt

Rake and shovel the extra dirt you pull out of the hole to avoid damaging your grass. Your yard will thank you for it. 

Use the process and tips mentioned above to use your power auger effectively. Your tasks should be much more manageable that way.                    

What a Rotary Hammer Is, and Its Uses

When it comes to the world of power tools, there are so many different models and varieties out there. A rotary drill is a tool that not all people are going to need or are going to benefit from, but it is a tool that certainly has a place. So, what is a rotary hammer, and what might it be used for? Keep reading to find out.

What Is a Roto Hammer?

A rotary hammer is also referred to as a rotary hammer drill, and it is used to help chip away or hammer hard materials. It is not a traditional drill in that it does not make holes necessarily or does not drill holes. Instead, it works to hammer or chip holes and chip away at very hard surfaces. You can think of it as a super mini jackhammer that is hand held.

A roto hammer is a tool that is part of most work sites that use larger tools like jackhammers. You can use a roto hammer at home; you do not have to use them at work sites only, but they are a very common tool at most construction sites.

How To Use a Rotary Hammer

A rotary hammer uses the hammering motion to chip away and make a hole so that the flutes of the drill bit can take away the pieces of whatever hard material it is that the rotary hammer is working to drill. You can use a ton of different drill bits to get a different size hole or to get a different overall effect. 

When it comes to a rotary hammer drills, they are often used to drill holes in very hard material like concrete so that things like rebar can be put in to help support a structure that is being built. Depending on the material you are hammering or the overall purpose of your hammering, you can choose a ton of different bits that will get you the effect and end result you are looking for.

Plenty of different bits can be used to take care of just about any job you have and just about any overall end you are trying to achieve. Now, this is not a tool that most people tend to have in their tool kit, but they are rather useful for bigger jobs.  

Contact Ram Rent-All for quality equipment rentals for a range of jobs.